Solid 1045 steel clevis pins with a diamond-knurled round grip head, smooth 1.1250-inch shaft and an unthreaded transverse cotter-pin hole near the tip. Bare machined, chamfered and deburred.
Sold in packs of 100 identical pins. Cart quantity 1 = 100 pins. Select nominal usable grip length. Cotter pins and retaining clips are not included.
Dimensions in inches: finished head diameter over knurl 1.750 +.000/-.025; head thickness 0.500 +/- .003; shaft diameter 1.1250 +.000/-.002. Cotter-pin hole diameter 0.281 +/- .002, drilled through the shaft. Hole-center-to-tip distance 0.562 reference.
Nominal grip length is the distance from underneath the head to the nearest edge of the cotter-pin hole. Actual grip can be .004 inch less than nominal due to manufacturing tolerances. Allow assembly clearance. Grip / overall reference length: 1.500 / 2.7025; 2.000 / 3.2025; 2.500 / 3.7025; 3.000 / 4.2025; 4.000 / 5.2025; 5.000 / 6.2025; 6.000 / 7.2025.
Knurl is a raised male diamond pattern, 96 diametral pitch with 30-degree helices. The finished head diameter includes knurl growth. Select retaining hardware to fit the stated hole and verify suitability for the application. No working-load or towing rating is assigned.
Manufacturing reference: MMW-KCP-001 Rev A, common geometry Sheet 1 and size Sheet 12 of 15. Each variant SKU matches the print.