Female Eye + Mounting Fork. Both halves have matching reach A. For threaded-both-end styles, both ends have the same selected thread size and pitch.
Body maximum OD 1.375 in; fork section 0.9375 x 0.9375 in; pivot pin 0.5000 in; smooth bore 0.5010 in; eye thickness 0.4375 in; fork gap 0.4415 in.
A is pivot center to rear mounting face or male shoulder. At a plain mounting end, A is center-to-center between its two holes. Male stud projection U 1.250 in. Reach selections: Short - A 2.000 in; Medium - A 2.500 in; Long - A 3.000 in. Overall lengths and component numbers are on the drawing.
Full-thickness eye at the pivot. Total side clearance .002-.006 in; pin diametral clearance .001-.002 in. Female threads are blind within the solid bosses. All threads right-hand; internal class 2B and external class 2A.
Machined bodies, pins and supplied studs: 1045 steel, bare and deburred, no heat treatment. Purchased retaining rings are spring steel; jam nuts are commercial steel.
100 identical complete assemblies: 100 fork bodies, 100 matching eyes/tabs, 100 headed pins, 100 C-clips, 100 jam nuts, and 100 mounting studs. Customer mounting bolts for plain ends excluded. Cart quantity 1 = 100 assemblies.
Initial design; first-article review required. No working-load or fatigue rating assigned. Verify application loads, thread engagement, free movement and retaining-ring seating before service.
Drawing: MMW-LKA-02 Rev A. Prices are USD per 100-set pack; shipping and tax additional.